http://obtainsearch.com/ http://blogs.law.harvard.edu/tech/rss RSSChannel 0.9.5 Fri, 20 Jun 2008 02:29:31 -0700 Fri, 20 Jun 2008 02:29:31 -0700 http://www.obtainsearch.com/idv.php?id=15110 Characteristics ㄩ With long-distance control function. Rigidity synchronizer in the way of crutched arms, which avoid the green blocks damaged when mould frame lifting Integrated vibrating bin and vibrating table, improve reliability of vibrating table. Advance vibrating technology. Feeding and forming by different vibrating mode assures high quality of feeding and forming. This machine is suitable for customers with small or medium amount of investment. Technical Data: Dimension:6600℅1990℅3000ㄗL℅W℅Hㄘ(mm) Rating pressure:21MPa Vibration: Table vibration Pallet size: 830℅660mm Cycle time: 15 sec Output: paving stone: 250℅250 ℅(50-100)mm.6 pcs./mould standard block: 390℅190℅190mm, 6 pcs./mould Power: 36.8kW All of our product will give good after sell serivice Send technicians to installation site for the guidance, equipment adjustment and training. after sell service 1.accept24-hour technical consultation and treat emergency of customer in time 2.technician will pay regular return visit and investigate and reform the happening or the potential 3.guarantee fast and right distribution of parts in each place http://www.obtainsearch.com/idv.php?id=15110 xu wen liang Sat, 21 Jun 2008 18:59:04 -0700 Raw Materials/Natural Resources http://www.obtainsearch.com/idv.php?id=14968 Gold Trading Sarl is a gold marketing company located in the west coast of africa in Cotonou-Benin. We are broker to so many seller's in Ghana, Burkina-Faso, Mail and Liberia of Gold dust,Gold Bars and Diamonds. We are posting our publication here to enable buyers contact us for the avaliable gold dust in our stand here in Cotonou-Benin which is 450kgs. Also we have a mining site in Ghana and Burkina-Faso seeking an investor for a joint venture by those sellers. Our Price is cheap as we act directly as the seller's mandate company. Please contact us for details of our offer if interested. Our E-mail; http://www.obtainsearch.com/idv.php?id=14968 Mr. John Michel Fri, 20 Jun 2008 02:29:31 -0700 Raw Materials/Natural Resources http://www.obtainsearch.com/idv.php?id=14530 AAC|Autoclave Aerated Concrete,AAC Equipments Introduction of AAC Equipments: Autoclaved Aerated Concrete (AAC) block and board have become the pillar industry in construction field. China has introduced AAC technology before 40 years, our company is the earliest manufacture and R屈D institute of Aerated Concrete (AAC) machinery, and our technology has reached the advanced level of Aerated Concrete (AAC) machine industry. The sales volume and comprehensive indexes of our Aerated Concrete (AAC) equipment are ahead of others in China. The aerated concrete (i.e. aeroconcrete) is characterized by the advantages of light weight, heat preservation, sound isolation, high strengthㄛprocessable property and so on, what＊s more, the raw materials of AAC are abundant. Especially, it can not only make use of industrial waste residue, improve environmental pollution, and protect tillable field, but also create favorable social and economic benefits to take fly ash as the raw material of AACblock and board. Aerated concrete (i.e. aeroconcrete) is the perfect wall material to replace the traditional solid clay brick. For many years, Aerated Concrete (AAC) has always accepted strong supports from the policies about reforming of wall material, tax policies and environment protection policies. Aeroconcrete (AAC) block and board have become the important part of new-type construction materials, and possess bright development future. Autoclave aerated concrete ploduction line(AAC production line) -- Process: 1.The raw materials store in the material storehouse (or stores the pot ) after dealing with reservly such as the lime , cement , gypsum , sand (or fly ash ). 2.Aluminium powder or the aluminium lotion is through dealing with the reserve material for use. 3. Raw materials measure according to certain matching by electron balance measure , aluminium powder , water put into aluminium powder mixer is it is it suspend the liquid to make to mix after measuring. 4. The batching water (cold water or hot water pitcher hot water ) is measured by the electronic water balance . 5. Put into and pour among the mixers in certain order after , raw materials , aluminium powder suspend the liquid is measured, pour and enter the mould after mixing evenly (panel should be put network slice of reinforcing bar in advance in the mould). 6. Quiet to is it raise in advance to park through certain temperature and time, is it transport to the cutting machine to hang http://www.obtainsearch.com/idv.php?id=14530 Li Chaojun Tue, 17 Jun 2008 02:35:11 -0700 Raw Materials/Natural Resources http://www.obtainsearch.com/idv.php?id=14528 Cutting Machine Cutting machine is the main equipment of prodrcins aeroconcrete, crete nildbe needed over 50000m3 is anecessary equipment to improve yield and quality ,our HJQ-A cutting with advanced teehnology ,can make the failed with only one step ,turning cut the sir sides . so our products are welcomed all over our country ,and gained honor from our users .after yesrs technology innovation ,nawaday,we are able to produce many models of concretecutlins machines. Cutter is the pivotal equipment in production of AAC products. Advantages: 1) Compact structure , easy operation and little maintenance; 2) Horizontal cutting and vertical cutting finished once; 3) Hexahedral cutting of the green brick ,product precision in accordance with GB/T 11969-1997; 4) Satisfying requirements of panel production,product precision in accordance with GB/T 15762-1995; 5) All waste materials shall be reclaimed, by which secondary pollution will not be resulted in All waste materials shall be reclaimed, by which secondary pollution will not be resulted in ; 6) Grrrn brick not conglutinated; 7) Lead screw drive used in cross 每section cut ,colvin gout 每of 每step of fluid drive; 8) Spacing and interlocking in the mechanical system to prevent accidents caused by improper operation; 9) With equipment to replace steel wire rapidly ; 10) No bowtie and crack. Also,our company produces other mining machines and construction machines.Such as: jaw crusher, impact crusher, hammer crusher, cone crusher and grinders, mills, sand machines,ect. welcome to enquiry! Contact Person: Chrisitna Zhou Cell: 86-13526817088 MSN: machinesupply at hotmail dot com http://www.obtainsearch.com/idv.php?id=14528 Li Chaojun Tue, 17 Jun 2008 02:25:19 -0700 Raw Materials/Natural Resources http://www.obtainsearch.com/idv.php?id=14526 Product Description Stone Crusher Application: Stone crushers are optimized after adopting advanced techniques. Stone crusher can crush granite, basalt, bluestone, etc the diameters of which are from 100mm to 500mm, and its crushing compression strength is not more than 320Mp. It features: Big reduction ratio, high crushing efficiency, and convenient maintenance. The final product is desirable device for aggregation used in highway and railway surface and water and electricity industry. Also,our company produces other mining machines and construction machines.Such as: jaw crusher, impact crusher, hammer crusher, cone crusher and grinders, mills, sand machines,ect. welcome to enquiry! Contact Person: Chrisitna Zhou Cell: 86-13526817088 MSN: machinesupply at hotmail dot com http://www.obtainsearch.com/idv.php?id=14526 Li Chaojun Tue, 17 Jun 2008 02:14:07 -0700 Raw Materials/Natural Resources http://www.obtainsearch.com/idv.php?id=14501 Our cone crusher is one of the main types of primary crushers in a mine or ore processing plant. Our cone crushers are designated in size either by the gape and mantle diameter or by the size of the receiving opening. Our cone crushers can be used for primary or secondary crushing. Our PY series Cone Crusher has been developed to crushe high or medium hardness material ,such as iron ore ,copper ore, limestone, quartz, granite, and sand stones, ect., in metallurgical, construction, road building, chemical, silicate Industries. The features of our cone crusher is below: 1. Our PY series cone crusher is of high reduction ratio. 2. Our cone crusher is high performance, low power consumption. 3. Our cone crusher is uniform size products. 4. Our cone crusher has also been used in the secondary and tertiary crushing. The working principle of our cone crusher is below: The crushing action is caused by the closing of the gap between the mantle line (movable) mounted on the central vertical spindle and the concave liners (fixed) mounted on the main frame of the crusher. The gap is opened and closed by an eccentric on the bottom of the spindle that causes the central vertical spindle to gyrate. The vertical spindle is free to rotate around its own axis. Models: PYB600 ~ PYB2200, PYD600 ~ PYD2200, PYZ900 ~ PYZ2200 Max input(mm): 35~300 Adjusting range of output (mm): 3~60 Capacity(t/h):12~1000 Electric motor power (kw): 30~260 Weight(t): 5~81.4 Overall dimensions (LWH) (mm): 280013001700, 305016402350, 400019002980, 487038004192, 542043004870 Notice: Any change of technical data shall not be advised additionally. Also,our company produces other mining machines and construction machines.Such as: jaw crusher, impact crusher, hammer crusher, cone crusher and grinders, mills, sand machines,ect. welcome to enquiry! Contact Person: Chrisitna Zhou Cell: 86-13526817088 MSN: machinesupply at hotmail dot com http://www.obtainsearch.com/idv.php?id=14501 Li Chaojun Mon, 16 Jun 2008 23:45:24 -0700 Raw Materials/Natural Resources http://www.obtainsearch.com/idv.php?id=14496 Our cone crusher is one of the main types of primary crushers in a mine or ore processing plant. Our cone crushers are designated in size either by the gape and mantle diameter or by the size of the receiving opening. Our cone crushers can be used for primary or secondary crushing. Our PY series Cone Crusher has been developed to crushe high or medium hardness material ,such as iron ore ,copper ore, limestone, quartz, granite, and sand stones, ect., in metallurgical, construction, road building, chemical, silicate Industries. The features of our cone crusher is below: 1. Our PY series cone crusher is of high reduction ratio. 2. Our cone crusher is high performance, low power consumption. 3. Our cone crusher is uniform size products. 4. Our cone crusher has also been used in the secondary and tertiary crushing. The working principle of our cone crusher is below: The crushing action is caused by the closing of the gap between the mantle line (movable) mounted on the central vertical spindle and the concave liners (fixed) mounted on the main frame of the crusher. The gap is opened and closed by an eccentric on the bottom of the spindle that causes the central vertical spindle to gyrate. The vertical spindle is free to rotate around its own axis. Models: PYB600 ~ PYB2200, PYD600 ~ PYD2200, PYZ900 ~ PYZ2200 Max input(mm): 35~300 Adjusting range of output (mm): 3~60 Capacity(t/h):12~1000 Electric motor power (kw): 30~260 Weight(t): 5~81.4 Overall dimensions (LWH) (mm): 280013001700, 305016402350, 400019002980, 487038004192, 542043004870 Notice: Any change of technical data shall not be advised additionally. Also,our company produces other mining machines and construction machines.Such as: jaw crusher, impact crusher, hammer crusher, cone crusher and grinders, mills, sand machines,ect. welcome to enquiry! Contact Person: Chrisitna Zhou Cell: 86-13526817088 MSN: machinesupply at hotmail dot com http://www.obtainsearch.com/idv.php?id=14496 Li Chaojun Mon, 16 Jun 2008 23:32:27 -0700 Raw Materials/Natural Resources http://www.obtainsearch.com/idv.php?id=14456 Our cone crusher is one of the main types of primary crushers in a mine or ore processing plant. Our cone crushers are designated in size either by the gape and mantle diameter or by the size of the receiving opening. Our cone crushers can be used for primary or secondary crushing. Our PY series Cone Crusher has been developed to crushe high or medium hardness material ,such as iron ore ,copper ore, limestone, quartz, granite, and sand stones, ect., in metallurgical, construction, road building, chemical, silicate Industries. The features of our cone crusher is below: 1. Our PY series cone crusher is of high reduction ratio. 2. Our cone crusher is high performance, low power consumption. 3. Our cone crusher is uniform size products. 4. Our cone crusher has also been used in the secondary and tertiary crushing. The working principle of our cone crusher is below: The crushing action is caused by the closing of the gap between the mantle line (movable) mounted on the central vertical spindle and the concave liners (fixed) mounted on the main frame of the crusher. The gap is opened and closed by an eccentric on the bottom of the spindle that causes the central vertical spindle to gyrate. The vertical spindle is free to rotate around its own axis. Models: PYB600 ~ PYB2200, PYD600 ~ PYD2200, PYZ900 ~ PYZ2200 Max input(mm): 35~300 Adjusting range of output (mm): 3~60 Capacity(t/h):12~1000 Electric motor power (kw): 30~260 Weight(t): 5~81.4 Overall dimensions (LWH) (mm): 280013001700, 305016402350, 400019002980, 487038004192, 542043004870 Notice: Any change of technical data shall not be advised additionally. Also,our company produces other mining machines and construction machines.Such as: jaw crusher, impact crusher, hammer crusher, cone crusher and grinders, mills, sand machines,ect. welcome to enquiry! Contact Person: Chrisitna Zhou Cell: 86-13526817088 MSN: machinesupply at hotmail dot com http://www.obtainsearch.com/idv.php?id=14456 Li Chaojun Mon, 16 Jun 2008 20:16:00 -0700 Raw Materials/Natural Resources http://www.obtainsearch.com/idv.php?id=14451 Product Description Stone Crusher Application: Stone crushers are optimized after adopting advanced techniques. Stone crusher can crush granite, basalt, bluestone, etc the diameters of which are from 100mm to 500mm, and its crushing compression strength is not more than 320Mp. It features: Big reduction ratio, high crushing efficiency, and convenient maintenance. The final product is desirable device for aggregation used in highway and railway surface and water and electricity industry. Also,our company produces other mining machines and construction machines.Such as: jaw crusher, impact crusher, hammer crusher, cone crusher and grinders, mills, sand machines,ect. welcome to enquiry! Contact Person: Chrisitna Zhou Cell: 86-13526817088 MSN: machinesupply at hotmail dot com http://www.obtainsearch.com/idv.php?id=14451 Li Chaojun Mon, 16 Jun 2008 20:08:10 -0700 Raw Materials/Natural Resources http://www.obtainsearch.com/idv.php?id=14448 Cutting Machine Cutting machine is the main equipment of prodrcins aeroconcrete, crete nildbe needed over 50000m3 is anecessary equipment to improve yield and quality ,our HJQ-A cutting with advanced teehnology ,can make the failed with only one step ,turning cut the sir sides . so our products are welcomed all over our country ,and gained honor from our users .after yesrs technology innovation ,nawaday,we are able to produce many models of concretecutlins machines. Cutter is the pivotal equipment in production of AAC products. Advantages: 1) Compact structure , easy operation and little maintenance; 2) Horizontal cutting and vertical cutting finished once; 3) Hexahedral cutting of the green brick ,product precision in accordance with GB/T 11969-1997; 4) Satisfying requirements of panel production,product precision in accordance with GB/T 15762-1995; 5) All waste materials shall be reclaimed, by which secondary pollution will not be resulted in All waste materials shall be reclaimed, by which secondary pollution will not be resulted in ; 6) Grrrn brick not conglutinated; 7) Lead screw drive used in cross 每section cut ,colvin gout 每of 每step of fluid drive; 8) Spacing and interlocking in the mechanical system to prevent accidents caused by improper operation; 9) With equipment to replace steel wire rapidly ; 10) No bowtie and crack. Also,our company produces other mining machines and construction machines.Such as: jaw crusher, impact crusher, hammer crusher, cone crusher and grinders, mills, sand machines,ect. welcome to enquiry! Contact Person: Chrisitna Zhou Cell: 86-13526817088 MSN: machinesupply at hotmail dot com http://www.obtainsearch.com/idv.php?id=14448 Li Chaojun Mon, 16 Jun 2008 19:58:01 -0700 Raw Materials/Natural Resources http://www.obtainsearch.com/idv.php?id=14446 AAC|Autoclave Aerated Concrete,AAC Equipments Introduction of AAC Equipments: Autoclaved Aerated Concrete (AAC) block and board have become the pillar industry in construction field. China has introduced AAC technology before 40 years, our company is the earliest manufacture and R屈D institute of Aerated Concrete (AAC) machinery, and our technology has reached the advanced level of Aerated Concrete (AAC) machine industry. The sales volume and comprehensive indexes of our Aerated Concrete (AAC) equipment are ahead of others in China. The aerated concrete (i.e. aeroconcrete) is characterized by the advantages of light weight, heat preservation, sound isolation, high strengthㄛprocessable property and so on, what＊s more, the raw materials of AAC are abundant. Especially, it can not only make use of industrial waste residue, improve environmental pollution, and protect tillable field, but also create favorable social and economic benefits to take fly ash as the raw material of AACblock and board. Aerated concrete (i.e. aeroconcrete) is the perfect wall material to replace the traditional solid clay brick. For many years, Aerated Concrete (AAC) has always accepted strong supports from the policies about reforming of wall material, tax policies and environment protection policies. Aeroconcrete (AAC) block and board have become the important part of new-type construction materials, and possess bright development future. Autoclave aerated concrete ploduction line(AAC production line) -- Process: 1.The raw materials store in the material storehouse (or stores the pot ) after dealing with reservly such as the lime , cement , gypsum , sand (or fly ash ). 2.Aluminium powder or the aluminium lotion is through dealing with the reserve material for use. 3. Raw materials measure according to certain matching by electron balance measure , aluminium powder , water put into aluminium powder mixer is it is it suspend the liquid to make to mix after measuring. 4. The batching water (cold water or hot water pitcher hot water ) is measured by the electronic water balance . 5. Put into and pour among the mixers in certain order after , raw materials , aluminium powder suspend the liquid is measured, pour and enter the mould after mixing evenly (panel should be put network slice of reinforcing bar in advance in the mould). 6. Quiet to is it raise in advance to park through certain temperature and time, is it transport to the cutting machine to hang http://www.obtainsearch.com/idv.php?id=14446 Li Chaojun Mon, 16 Jun 2008 19:50:20 -0700 Raw Materials/Natural Resources http://www.obtainsearch.com/idv.php?id=14434 Product Description Stone Crusher Application: Stone crushers are optimized after adopting advanced techniques. Stone crusher can crush granite, basalt, bluestone, etc the diameters of which are from 100mm to 500mm, and its crushing compression strength is not more than 320Mp. It features: Big reduction ratio, high crushing efficiency, and convenient maintenance. The final product is desirable device for aggregation used in highway and railway surface and water and electricity industry. Also,our company produces other mining machines and construction machines.Such as: jaw crusher, impact crusher, hammer crusher, cone crusher and grinders, mills, sand machines,ect. welcome to enquiry! Contact Person: Chrisitna Zhou Cell: 86-13526817088 MSN: machinesupply at hotmail dot com http://www.obtainsearch.com/idv.php?id=14434 Li Chaojun Mon, 16 Jun 2008 18:57:41 -0700 Raw Materials/Natural Resources http://www.obtainsearch.com/idv.php?id=14433 AAC|Autoclave Aerated Concrete,AAC Equipments Introduction of AAC Equipments: Autoclaved Aerated Concrete (AAC) block and board have become the pillar industry in construction field. China has introduced AAC technology before 40 years, our company is the earliest manufacture and R屈D institute of Aerated Concrete (AAC) machinery, and our technology has reached the advanced level of Aerated Concrete (AAC) machine industry. The sales volume and comprehensive indexes of our Aerated Concrete (AAC) equipment are ahead of others in China. The aerated concrete (i.e. aeroconcrete) is characterized by the advantages of light weight, heat preservation, sound isolation, high strengthㄛprocessable property and so on, what＊s more, the raw materials of AAC are abundant. Especially, it can not only make use of industrial waste residue, improve environmental pollution, and protect tillable field, but also create favorable social and economic benefits to take fly ash as the raw material of AACblock and board. Aerated concrete (i.e. aeroconcrete) is the perfect wall material to replace the traditional solid clay brick. For many years, Aerated Concrete (AAC) has always accepted strong supports from the policies about reforming of wall material, tax policies and environment protection policies. Aeroconcrete (AAC) block and board have become the important part of new-type construction materials, and possess bright development future. Autoclave aerated concrete ploduction line(AAC production line) -- Process: 1.The raw materials store in the material storehouse (or stores the pot ) after dealing with reservly such as the lime , cement , gypsum , sand (or fly ash ). 2.Aluminium powder or the aluminium lotion is through dealing with the reserve material for use. 3. Raw materials measure according to certain matching by electron balance measure , aluminium powder , water put into aluminium powder mixer is it is it suspend the liquid to make to mix after measuring. 4. The batching water (cold water or hot water pitcher hot water ) is measured by the electronic water balance . 5. Put into and pour among the mixers in certain order after , raw materials , aluminium powder suspend the liquid is measured, pour and enter the mould after mixing evenly (panel should be put network slice of reinforcing bar in advance in the mould). 6. Quiet to is it raise in advance to park through certain temperature and time, is it transport to the cutting machine to hang http://www.obtainsearch.com/idv.php?id=14433 Li Chaojun Mon, 16 Jun 2008 18:51:31 -0700 Raw Materials/Natural Resources http://www.obtainsearch.com/idv.php?id=14432 Cutting Machine Cutting machine is the main equipment of prodrcins aeroconcrete, crete nildbe needed over 50000m3 is anecessary equipment to improve yield and quality ,our HJQ-A cutting with advanced teehnology ,can make the failed with only one step ,turning cut the sir sides . so our products are welcomed all over our country ,and gained honor from our users .after yesrs technology innovation ,nawaday,we are able to produce many models of concretecutlins machines. Cutter is the pivotal equipment in production of AAC products. Advantages: 1) Compact structure , easy operation and little maintenance; 2) Horizontal cutting and vertical cutting finished once; 3) Hexahedral cutting of the green brick ,product precision in accordance with GB/T 11969-1997; 4) Satisfying requirements of panel production,product precision in accordance with GB/T 15762-1995; 5) All waste materials shall be reclaimed, by which secondary pollution will not be resulted in All waste materials shall be reclaimed, by which secondary pollution will not be resulted in ; 6) Grrrn brick not conglutinated; 7) Lead screw drive used in cross 每section cut ,colvin gout 每of 每step of fluid drive; 8) Spacing and interlocking in the mechanical system to prevent accidents caused by improper operation; 9) With equipment to replace steel wire rapidly ; 10) No bowtie and crack. Also,our company produces other mining machines and construction machines.Such as: jaw crusher, impact crusher, hammer crusher, cone crusher and grinders, mills, sand machines,ect. welcome to enquiry! Contact Person: Chrisitna Zhou Cell: 86-13526817088 MSN: machinesupply at hotmail dot com http://www.obtainsearch.com/idv.php?id=14432 Li Chaojun Mon, 16 Jun 2008 18:45:51 -0700 Raw Materials/Natural Resources http://www.obtainsearch.com/idv.php?id=14421 Our cone crusher is one of the main types of primary crushers in a mine or ore processing plant. Our cone crushers are designated in size either by the gape and mantle diameter or by the size of the receiving opening. Our cone crushers can be used for primary or secondary crushing. Our PY series Cone Crusher has been developed to crushe high or medium hardness material ,such as iron ore ,copper ore, limestone, quartz, granite, and sand stones, ect., in metallurgical, construction, road building, chemical, silicate Industries. The features of our cone crusher is below: 1. Our PY series cone crusher is of high reduction ratio. 2. Our cone crusher is high performance, low power consumption. 3. Our cone crusher is uniform size products. 4. Our cone crusher has also been used in the secondary and tertiary crushing. The working principle of our cone crusher is below: The crushing action is caused by the closing of the gap between the mantle line (movable) mounted on the central vertical spindle and the concave liners (fixed) mounted on the main frame of the crusher. The gap is opened and closed by an eccentric on the bottom of the spindle that causes the central vertical spindle to gyrate. The vertical spindle is free to rotate around its own axis. Models: PYB600 ~ PYB2200, PYD600 ~ PYD2200, PYZ900 ~ PYZ2200 Max input(mm): 35~300 Adjusting range of output (mm): 3~60 Capacity(t/h):12~1000 Electric motor power (kw): 30~260 Weight(t): 5~81.4 Overall dimensions (LWH) (mm): 280013001700, 305016402350, 400019002980, 487038004192, 542043004870 Notice: Any change of technical data shall not be advised additionally. Also,our company produces other mining machines and construction machines.Such as: jaw crusher, impact crusher, hammer crusher, cone crusher and grinders, mills, sand machines,ect. welcome to enquiry! Contact Person: Chrisitna Zhou Cell: 86-13526817088 MSN: machinesupply at hotmail dot com http://www.obtainsearch.com/idv.php?id=14421 Li Chaojun Mon, 16 Jun 2008 18:12:14 -0700 Raw Materials/Natural Resources http://www.obtainsearch.com/idv.php?id=14411 Our cone crusher is one of the main types of primary crushers in a mine or ore processing plant. Our cone crushers are designated in size either by the gape and mantle diameter or by the size of the receiving opening. Our cone crushers can be used for primary or secondary crushing. Our PY series Cone Crusher has been developed to crushe high or medium hardness material ,such as iron ore ,copper ore, limestone, quartz, granite, and sand stones, ect., in metallurgical, construction, road building, chemical, silicate Industries. The features of our cone crusher is below: 1. Our PY series cone crusher is of high reduction ratio. 2. Our cone crusher is high performance, low power consumption. 3. Our cone crusher is uniform size products. 4. Our cone crusher has also been used in the secondary and tertiary crushing. The working principle of our cone crusher is below: The crushing action is caused by the closing of the gap between the mantle line (movable) mounted on the central vertical spindle and the concave liners (fixed) mounted on the main frame of the crusher. The gap is opened and closed by an eccentric on the bottom of the spindle that causes the central vertical spindle to gyrate. The vertical spindle is free to rotate around its own axis. Models: PYB600 ~ PYB2200, PYD600 ~ PYD2200, PYZ900 ~ PYZ2200 Max input(mm): 35~300 Adjusting range of output (mm): 3~60 Capacity(t/h):12~1000 Electric motor power (kw): 30~260 Weight(t): 5~81.4 Overall dimensions (LWH) (mm): 280013001700, 305016402350, 400019002980, 487038004192, 542043004870 Notice: Any change of technical data shall not be advised additionally. Also,our company produces other mining machines and construction machines.Such as: jaw crusher, impact crusher, hammer crusher, cone crusher and grinders, mills, sand machines,ect. welcome to enquiry! Contact Person: Chrisitna Zhou Cell: 86-13526817088 MSN: machinesupply at hotmail dot com http://www.obtainsearch.com/idv.php?id=14411 Li Chaojun Mon, 16 Jun 2008 17:42:58 -0700 Raw Materials/Natural Resources http://www.obtainsearch.com/idv.php?id=13110 Lithium power battery pack model:IFR18650*48PCS capacity:10A voltage:24V Cycle Life; Residual capacity≡80% after 500 cycles http://www.obtainsearch.com/idv.php?id=13110 Tony Guo Tue, 10 Jun 2008 00:35:51 -0700 Raw Materials/Natural Resources http://www.obtainsearch.com/idv.php?id=13106 Brand Name: ALF Supply Ability: 300,000pcs/month MInium order: 1000pcs Delivery lead: 20day Certification: UL/CE Specifications: 1,Nominal votage:3.7v 2;Charge votage:4.2v 3;Charge to 4.2V at constant current 0.5C, then constant voltage charge to taper current 0.05C 4; Discharge to 3.0V at constant current 0.5C 5; Discharge cut-off votage: 2.75v/cell 6: Cycle Life; Residual capacity≡80% after 500 cycles vs. Discharge capacity of first cycle 7: temperature: Storage temperature-30∼C---+70∼C Work temperature -20∼C---+60∼C http://www.obtainsearch.com/idv.php?id=13106 Tony Guo Tue, 10 Jun 2008 00:16:46 -0700 Raw Materials/Natural Resources http://www.obtainsearch.com/idv.php?id=12875 We supply the magnetic module,if you want,please contact us! Ferrite magnet is one kind of the most widespread permanent-magnet materialㄛand it is manufactured by powder metallurgy. mainly divides into the (Ba) and (Sr) two kinds with anisotropy and isotropicㄛand is one kind of permanent-magnet material which is not easy to degauss and corrode, the highest operating temperature may amount to 250⊥. It is rigid and crisp can be cut and process with diamond-sand. It is mainly used for permanent magnetic motors and speakers. http://www.obtainsearch.com/idv.php?id=12875 Lu Ying Sun, 08 Jun 2008 06:36:50 -0700 Raw Materials/Natural Resources http://www.obtainsearch.com/idv.php?id=12652 We supply the flexible magnet,if you want,please contact us! Ferrite magnet is one kind of the most widespread permanent-magnet materialㄛand it is manufactured by powder metallurgy. mainly divides into the (Ba) and (Sr) two kinds with anisotropy and isotropicㄛand is one kind of permanent-magnet material which is not easy to degauss and corrode, the highest operating temperature may amount to 250⊥. It is rigid and crisp can be cut and process with diamond-sand. It is mainly used for permanent magnetic motors and speakers. http://www.obtainsearch.com/idv.php?id=12652 Lu Ying Thu, 05 Jun 2008 21:22:03 -0700 Raw Materials/Natural Resources